Insulation performance and maintenance of cold-pressed terminals

When using cold-pressed terminals or terminal blocks, if there is poor contact, it is usually due to the external pressure of the cable, and the structure and performance of the contacts are relatively stable. If the structure of the contact is unreasonable and the mold is unstable, it will lead to a decrease in the performance of the insulating parts in the cold-pressed terminal, resulting in poor contact.
If the insulating parts with better insulation performance can ensure the position of the contacts and ensure the mutual insulation between the contacts and the housing, many small cold-pressed terminals with high density will cause many metal parts to be damaged due to the poor quality of the insulating parts. If there is harmful gas in the body, conductive channels will be formed on the surface, which will eventually lead to serious poor insulation, these phenomena are inevitable.
If the solid insulation is not good, it cannot perform any insulating function. Solid insulation protects the contacts and is used for positioning and locking devices. If it is not fixed properly, it will cause a momentary power failure, or even damage the entire product. Therefore, it is very important to maintain the insulation performance and correct maintenance of cold-pressed terminals.
Cold-pressed terminal is a commonly used electrical connection device for connecting wires and electrical equipment. Its function is to fix the wires on the terminal by pressure to achieve electrical connection. Since cold-press terminals are directly related to electrical safety, special attention should be paid to their installation and maintenance during use.
In order to avoid problems such as bad touch of cold-pressed terminals, the following points need to be paid attention to: first, when purchasing cold-pressed terminals, choose products with reliable quality and guaranteed brand; secondly, when installing, follow the instructions for use. The installation; Finally, regular maintenance and inspection, to find and solve problems in time.
In addition, attention should also be paid to the environmental performance of cold-pressed terminals. Modern society has higher and higher requirements for environmental protection, so environmental protection should also be considered when using cold-pressed terminals. You can choose environmentally friendly cold-pressed terminal products, or properly handle and recycle waste cold-pressed terminals to reduce environmental pollution.