Detection And Identification Of Cold-pressed Terminals

In our electricians, cold-pressed terminal blocks are generally used to refer to terminal blocks. In fact, they are also called cold-pressed terminal blocks. There are many types, such as double holes, single holes, hooks or sockets, etc. We can also classify it from its material, which can include copper, zinc, copper galvanized and so on. Usually we will use it to transmit signals or conduct electricity.
In the project, the cold-pressed terminal block can reserve an interface for the project, and of course it can also be used as a pre-embedded device. When the section of Yueqing Jinbi Electric cold-pressed terminal is inspected, his imaging is very clear and spacious, and he still has a long working distance. It has high precision, and its cross-sectional imaging is very clean when combining wire harness terminals, and the measurement is more accurate. Some friends said that they want to see if the cold-pressed terminals are good, then Yueqing Jinbi Electric will tell you that it needs to be tested with professional equipment.
We can use one or more methods to identify the line segment of the cold-pressed terminal block and the wire, and we can use the mark to confirm whether the cold-pressed terminal block of the marked device is in the same position as the line segment of the wire. Use the marking system to identify the color of the ferrule terminal block and the wire segment. Of course, I can also use the corresponding image symbols to identify and see if their graphics are the same.