How To Detect The Crimping Of Cold-pressed Terminal Blocks?

1. According to the use of the wire cross-section, select the appropriate cold-pressed terminal block, and the requirements on the specifications need to be exactly the same.
2. Strip the length of the wire on the insulating layer within a specified range. The length requirement is relatively strict and must be done in the correct way.
3. All metal wires in the wire must be completely wrapped inside the cold-pressed terminal, and copper wires must not be scattered.
4. The entire crimping part must meet the requirements, and the requirements for the crimping parts must be correct.
5. In terms of requirements after crimping, testing can be carried out in accordance with relevant standards, mainly to check the tensile strength. You can refer to the requirements of relevant standards, because cold-pressed terminals are very important in the quality of crimping.
6. The tools needed for crimping of cold-pressed terminals also need to be tested accordingly, preferably every three months, and the tools that meet the requirements need to be replaced with expiration date labels.