Precautions for crimping of fork-shaped cold-pressed terminals

Many people do not understand the operation process when crimping fork-shaped cold-pressed terminals. Today, I will take a look at the crimping process together with you. At the same time, there are some points for attention. You can pay more attention to the daily operation to ensure better crimping. The effect brings more convenience to the later use.
1. When soldering the fork-type cold-pressed terminal, it is necessary to select the electric soldering iron tool with the corresponding power according to the diameter of the bare wire. The soldering process should not exceed 5 seconds. Do not let the flux penetrate into the insulator, otherwise it will affect the insulation of the terminal, resistance will also drop.
2. When dismantling, it is necessary to install protective caps and other dust-proof measures separately. If the cold-pressed terminals are not disassembled after being connected for a long time, it is necessary to put an insurance between the plug and the socket to avoid affecting the use effect.
3. When the fork-shaped cold-pressed terminal is crimped or locked, it cannot be energized, so pay more attention to this.
After the fork-shaped cold-pressed terminal is crimped, in addition to the above points, it is also necessary to check whether the wire is pressed tightly, so as to ensure the conductivity and avoid the problem of falling off during use in the future.