Knowledge

When using cold-pressed terminals, you must be familiar with the operation method to a certain extent, so as to ensure correct operation. Ferrules that are not tamperproof must be

1. The piercing connection method of the cold-pressed terminal: The puncture connection method of cold-pressed terminals, also known as insulation displacement connection, has high

How to effectively solve such problems when the insulation performance of the terminals is getting worse and worse during use? Let's focus on the main reasons for the deterioration

The actual position or relative position of the cold-pressed terminal should be selected in a suitable position. The solder pins for the perforated cold-pressed terminals need to b

When using cold-pressed terminals or terminal blocks, if there is poor contact, it is usually due to the external pressure of the cable, and the structure and performance of the co

1. The storage environment of cold-pressed terminal blocks varies from controllable clean, heated or air-conditioned, humid warehouses, offices or factories to uncontrollable corre

As an intermediate stage of terminal block transactions, warehousing and transportation have a close relationship with the impact of terminal blocks. The following presents you wit

When it comes to ring terminals, many friends may find them relatively unfamiliar. In fact, it is often used in the electrical industry, so what is the function of the ring termina

Many people do not understand the operation process when crimping fork-shaped cold-pressed terminals. Today, I will take a look at the crimping process together with you. At the sa

In the electrical wiring system, the connection between PCB terminals, such as screw terminals and circuit boards, needs to be fixed by soldering. However, in some cases, it may be

1. Use the corresponding suitable cold-pressed terminal according to the cross-section of the wire, and the corresponding specifications are required to be exactly the same. 2. The

The core of the automatic control of the ring terminal is that the control unit must be reliably isolated from the sensors and actuators to avoid interference. The WUKG2 optical is